Hi all,
What a nightmare of a week for us. We are trying to get new machine shop up and running with all Haas equipment and having nothing but issues with all our machines. Maybe some of you out there can help solve a few of these problems, as our local support isnt that great.

1/ St10 with Royal collets.......barfeeder push rod not long enough and we end up with a 3 inch remnant at full push capacity, due to collets being longer than chick.

2/ St10.....Bar feeder liner extension sticks out the back of the machine, past the coolant catcher. This causes coolant to fly out of the spindle when spinning.

3/ DS330 SSY with barfeeder.....barfeeder is a "v" axis on the control, but an incremental move for the "y" axis is also a "v". We have been told by Haas that our machine configuration is not 100% compatable with the barfeeder.

I have been told that we can purchase a pneumatic extension add on for the bar feeders (added expense). Any other ideas?

Thanks