Hello all, here I go with my build
2.5 x 4 plasma table (32" x 50" actual travel)


Small footprint, rigid, light gantry for speed, accurate
Gantry steel frame not welded together but supported by a welded steel frame
Axis are linear guideways, X hiwin 15mm and Y thk 15mm
Ballscrews 10mm lead for X and Y

Plasma torch: Hypertherm powermax 45
Electronics: geckodrives, stepper motors, mach3

Here are the drawings of the x and y axis, the X is mounting to 2 x 5 x 3/16 rectangle tube,