[IBBruin]

Why would you cut ON the line? Files like these are made so you can use ANY size cutter and make the parts fit! Just use cutter comp and the slots will come out the way they were designed to fit. I use an 1/8" end mill for everything up to 3/4", works fine and I don't need to change the designed part. I just scale it to the sixe of the material and go!

My 2 cents!!!

Larry

As I mentioned in my post, there are ways around anything. Someone brand new to dxf, gcode, offsets, cutter comp could easily be misled. I'm not bashing or being negative in any way. When you first get into cnc, there is a pretty steep learning curve , servos, steppers, printer ports, post processors, lead screws, active high, soft limits, CAD, CAM, gcodes, mcodes, missed steps just to name a few. Most of the regulars here know enough of this to cut almost anything but someone new can be overwhelmed and needs things to be put a little simpler. I"m done with this subject.My comments can either be taken as I intended or not.

Cheers :cheers: