hi

I´m having problems on my mill. When I send commands speed is not correct and much more speed problem is bigger
s500, machine starts move to 492rpm
s1000, 1300 rpm
s2500, 2800 rpm
s4000, 4500 rpm
s5000, 5300 rpm

this sounds pretty much correct, but when you make an speed override or push reset problems increase, also it happens when programing different speeds on a long program run.

s1000, 550 rpm
s1300, 897 rpm
s2000, 1500 rpm
s5000, 4400 rpm

How can I configure machine or mach3 to solve this problems.

cheers