Hey all, I've had a Joe's 2006 R2 machine for a bit, but want to mod it for 5 axes. I've mocked up a design that could mount onto the Z-axis plate.

I've used bearings from VXB, mounting hubs from Pololu.com, and some standard 180oz/in NEMA 23 motors.

This is my first attempt at Solidworks and a 5axis design, do you think this would work?

(I can't seem to upload any files, so here's a google drive link, just DL the file(s) and open)

EASM File
https://docs.google.com/open?id=0Bwa...kFlMnpvQ3dCMEE

Solidworks Files
https://docs.google.com/open?id=0Bwa...VFPM2FrTzE4OVU

-s3r4ph