gday all.first post. would liketo thank all the good people on this forum who use their time to share their knowledge and builds that inspire people such as myself to dive in and have a crack. just completed sx3 converion using ncfusion delux kit and G540 4-Axis kit(110V/220VAC):
1 pcs G540 4 axis Stepper Driver with 4pcs DB9 connectors
1 pcs NEMA34 906 oz-in Stepper Motor
3 pcs NEMA23 KL23H2100-35-4B (1/4” Dual shaft with a flat) 381 oz-in
1 pcs KL-600-48 48V/12.5A 115V /230V Power Supply

playing around with tuning/settings and was hoping someone who has been through this on same or similar setup would be kind enough to share where they settled on vel/acc, step/dir pulse settings.(which is not clear to me) and kernel speed. bit difficult to know optimum settings and speeds when first time ever seen one working and finding conflicting info. cpu is 3.2Ghz 1Gb ram with no graphics card( should i get one?) cant wait to start using and trying to get my head around which cad/cam to start using as have no experience in such.would like something not steeply priced and user/beginner freindly. thankyou in advance
David