I built a 52X62X8 CastCNC Joes 4X4 Hybrid R&P with welded base, vrail, and 2.2kw water cooled chinese electrospindle with Hitachi VFD.

Now I am attempting to bolt on a QU-BD MBE dual extruder. I will be adding another G540 to my existing machine. Plan to use a 8"X8" heated bed and Nuri's GNEXLabs GECS2TC1 and GECS2TS1 boards to control the temp monitoring and DC DC relays to the 12VDC to power them. Everything will be DIN mounted in a 16X14X8 Hoffamn steel enclosure..

OK, had a little shop time today.

Some parts:







Dug out some DIN components I had too.




Here is the Z mount, plates, and 1530 mounted. This will get a Drop plate and the eventual extruder mount.





I cut some DIN rail and mounted it. I also figured out my PS arrangement. Made sure fans and most vents were open.



Next up I will cut the hole for the G540 and some connectors.