Not really power loss as much as Estop..
I didn't code moving away for tool change and found myself forced to do the never do.. Hit Estop mid tool change.
The machine is a Dah Lih 1450 with Fanuc 18. Although PMC title data says it is a MCV-1020A
The Z axis is locked out (no jog,hand wheel...)
No M codes can be entered unless all axis are Zero first.
Can't Zero Z axis while mid tool change..
Manual gives 2 options
1) cycle thru with Mcodes (not an option)
2) to depress buttons I don't have.
HELP!!!
I need 10 minutes to finish a part due Monday AM. It's too big to put on my manual. UGH!!!