[samlasercnc]

GWEIKE LF10 metal fiber laser marking machine FOR METAL

Air cooled cooling systerm,easy and quickly installation,USB contacted with any computer and install softerware easily
Use interfaces types: text, graphics, serial number, serial number, a d bar code, 2 d barcode, successive signet (optional equipments),etc

Suitable for: anodized sculpture, hand tools deep carved, aluminum a deep carved, stainless steel surface carved black, IC table sculpture, etc.!

Advantages: small volume, avoid consumables, flexible degree is high, use 5-100000 hours and hours without power attenuation problem!

Main parts:
1.laser head can change manually by wheel
2.EzCad2.7.0 software&softdog
3.one set computer
4.3d removable working table
5.air cooling system
6.USB port
7.10/20W pulsed laser&laser power


Option parts:
1.UK SPI 10W pulsed laser&laser power
2.rotary attachment

Main specification:
Laser type:Ytterbium Fiber
Operation type:Q – switched
Laser power :10/20w
Each pulse energy (mj): 0.5 1
Laser wavelength (nm):1060 ~ 1070
Pulse wave frequency:20 ~ 80 KHz
working area 100*100mm/150*150mm