Hey guys, I signed up for this site awhile ago lurking around here and there. I've been wanting a Cnc mill for a long time so I purchased a g0704 because of the popularity, support and "easy" conversion to Cnc.

Machiniclly everything is good, I installed ball screws etc all looks perfect, so I got the stepers etc. High-Torque Stepper Motor, Stepper Motor, Driver, Stepper Motor kit, DC Servo Motor, DC Servo Motor kit, Stepper Motor Power Supply, CNC Router, Spindle, and other Components. Automation Technology Inc is the kit I bought thinking the rest will be a breeze, seems it isn't lol I started by testing and that's as far as I got. The stepper is getting power(locking up) everything looks like it should work, but of course why would it right =X

Specs
G0704
Ball screws
Bdtools mounts
This stepper kit, psu, digital drivers, and a c10 bob High-Torque Stepper Motor, Stepper Motor, Driver, Stepper Motor kit, DC Servo Motor, DC Servo Motor kit, Stepper Motor Power Supply, CNC Router, Spindle, and other Components. Automation Technology Inc
Tower is a older compaq 1.3 ghz 512mb ram
Tower only puts out 3.5 volts instead of 5v documentation says 3.5-5 is ok going to bob
Cable is 25ft 1:1 db25

Everything is wired like ati says, I noticed cnc4pc has it wired differently should I try that?

I donno what else I can do, I suspect the computer or the cable but I am I little fustrated.

I'd appciate any help

I can answer any questions

Thanks guys
-joe