So I dragged home this old(1986?) Blue KM3P. The graphics screen was dead, but it came with an extra CRT. Got the machine up and running, and swapped the crt, and it worked! Sort of... see the first photo- seems the image is too wide. The horizontal adjustment makes changes, but small ones that don't help. I have heard that caps can go bad? which ones should I be suspicious of?
Been lurking for a while, learning. Thanks to the help learned here, i got it running on my phase converter, and can program off single phase- tho had to move control and servo transformers to the good power leads. Thanks!!
Results 1 to 6 of 6
Threaded View
-
12-21-2012, 02:32 AM #1
Registered
- Join Date
- Jan 2009
- Posts
- 3
Why is the graphics screen doing this? KM3P Ultimax II
Reply With QuoteSimilar Threads
-
Ultimax replacement graphics screen
By tallenttoolroom in forum HURCOReplies: 25Last Post: 04-17-2023, 12:06 PM -
Km3p Ultimax 2
By bertcnc in forum HURCOReplies: 14Last Post: 10-13-2020, 02:57 AM -
KM3P Ultimax Boards
By noidea in forum HURCOReplies: 6Last Post: 09-19-2012, 02:01 PM -
KM3P Ultimax power up problem
By Rick Kight in forum HURCOReplies: 2Last Post: 10-13-2008, 12:41 PM -
2412 graphics screen
By Larry Myers in forum Sharp CNCReplies: 1Last Post: 03-12-2008, 01:36 AM
Posting Permissions
