587,349 active members*
3,025 visitors online*
Register for free
Login

Thread: Help! Having trouble moving my motors

Results 1 to 20 of 34

Threaded View

  1. 01-17-2013, 04:53 PM #1
    timbochung
    timbochung is offline Registered
    Join Date
    Dec 2011
    Posts
    49

    Help! Having trouble moving my motors

    Hi,

    I have finally connected my system (see pic)but am unable to make the motors move. Not sure what to do next...

    - I've configured channels (0,1,2) to outputs (8,10,12) respectively (see pic); All other setting are identical otherwise; The channels have each been downloaded manually to the board

    - In the step response screen, I can get the motors to do a tiny jog (<0.5sec) but unable to do any other movements otherwise (see pic)

    - No success in using the jog function in KmotionCNC either.

    Help!

    Thanks,
    Tim

    P.S. I've uploaded my I/O map from a previous post
    Attached Thumbnails Attached Thumbnails Initial System Setup.jpg   Axis Configuration.PNG   Step Response.jpg   C10_KFLOP IO Map_rev.1.jpg  

    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. motors not moving Gecko 201x
    By silyavski in forum Gecko Drives
    Replies: 4
    Last Post: 08-18-2011, 08:17 AM
  2. Motors not moving (Geckos 202.)
    By stef_d in forum DIY CNC Router Table Machines
    Replies: 1
    Last Post: 08-23-2010, 07:07 AM
  3. Motors not moving
    By neric in forum DIY CNC Router Table Machines
    Replies: 3
    Last Post: 07-27-2010, 10:58 AM
  4. Mach3 not moving motors
    By jasper371 in forum Mach Mill
    Replies: 2
    Last Post: 06-15-2009, 10:32 PM
  5. Motors not moving
    By lamicron in forum Mach Mill
    Replies: 14
    Last Post: 05-20-2008, 01:54 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules