Hello Folks,

I am in the process of rewiring my old MH600E (1986ish) and could use a little help.

There is a switch on the relay board on the inside of the electrical cabinet door which is labeled "Y axis brake release" or something like that. I have removed 95% of the machine's covers and haven't found any sign of a braking mechanism for that axis.

Most of the electronics have been stripped from the machine and I want to pull the Y axis servo, but am hesitant to do that without confirming the bed height may be locked by the motor and may come tumblin' down if I pull the servo.

Any thoughts on this?

Thanks,
DB.