Hello, I am looking for quotes on a single part. It is a shaft about 16" long with a couple of shoulders and some threads. Any mild steel will do for this part. Its for a prototype machine and there may be more work to come.
There are some bearings going on it so some of the tolerances are a bit tight. I am not great with specifying tolerances, so if they seem odd, just email me to discuss. Also its for a high speed application (7-8000rpm) so runout between cylindrical sections must be an absolute minimum. The threads are for a standard N-06 locknut (1.173" major diameter, 18tpi).
I have attached a drawing, and I can email a .sldprt or .dxf of the file so you can see it better.
Thanks
Results 1 to 3 of 3
Threaded View
-
02-12-2013, 01:14 AM #1
Registered
- Join Date
- Oct 2007
- Posts
- 2
I need a prototype part turned, hobbyist?freelance? please quote
Similar Threads
-
RFQ for turned part
By fastolds in forum RFQ (Request for Quote)Replies: 1Last Post: 11-22-2011, 05:04 PM -
NEED A QUOTE - small aluminum prototype 3.5" long Drawings attachment
By Greg Koziol in forum Employment OpportunityReplies: 10Last Post: 05-28-2010, 04:50 AM -
Single unit prototype quote
By tjd10684 in forum Employment OpportunityReplies: 6Last Post: 07-17-2009, 03:35 PM -
RFQ quote /prototype
By Motorcoach1 in forum Employment OpportunityReplies: 12Last Post: 02-21-2008, 07:35 PM -
Quote Please Prototype
By Bluesman in forum Employment OpportunityReplies: 2Last Post: 07-04-2007, 06:09 PM
Posting Permissions
