Good afternoon, Tom everybody.
I'm from Ukraine. I’ve been working with your control board (Kflop) and KmotionCNC more than a year. During this time, I’ve made and launched two CNC machines. You can watch the video, which shows their work, here . In general I’m satisfied with the work of control board and software, but there are several issues/details I’d like to improve/fix for more reliable and productive work of CNC machine.

1 .Offsets saving. I know that this feature is implemented in version 4.30, but I don’t understand how it works and how can I save and then call out any of the offsets. Could you show me the process on several examples?

2. For more comfortable work of CNC-operator, I need to assign hotkeys for the user buttons, for example Init, Home, Probe, Execute, etc. Could you tell how can I do this?

3. Recently I’ve reconfigured all axes with Jerk parameter and I liked those step responses (graphs) that I’ve got using this option.


But at the same time I was very surprised that this option doesn’t work with G1, G2, G3 commands. As a result during the processing of linear trajectories with the usage of G1, a very strong vibration appeared.
So, tell me, please, how I can use Jerk parameter with G1, G2, G3 commands.

4. While using the Feedrate Override option a maximum speed limitation doesn’t work. I mean that I can set the speed that will be faster than the one set in Tool Setup. For example, the operating speed is 3500 mm / min. With the Feedrate Override parameter 2, the speed will be - 7000 mm / min. and won’t be limited by that one, which is set in Tool Setup (5000 mm / min.)

Thank you