Just looking for feedback before I start cutting up MDF. Would love to hear recommendations on bearing ratio's and best pratices. I've been researching as best I can and this is a simplified design I've come up with.

Click image for larger version.  Name: FrontOB.jpg  Views: 0  Size: 85.8 KB  ID: 180062 Click image for larger version.  Name: RearOB.jpg  Views: 0  Size: 80.7 KB  ID: 180063 Click image for larger version.  Name: LowFront.jpg  Views: 0  Size: 90.3 KB  ID: 180064

Assume 3/4" MDF, 16mm supported rails, ACME lead screws and 425 oz./inch. steppers.