We are proud to announce the unveiling of the all new Pulsar servo milling machine at the Cabin Fever EXPO in York, PA on April12-14, 2013.

The Pulsar is an all servo machine with rigid tapping, travel speeds of 500 IPM, with power and accuracy using 3 phase AC servo axes motors. Table travels have increased to an impressive 9.5" x 15.75". Preset mounts for the pending automatic tool changer KIT are included in the castings. A rugged lever draw bar is available to allow for rapid tool changes using the TTS or QTC tool systems.

The coolant and stand has radically been changed to allow for larger storage of coolant with finer liquid filtration. Two coolant pumps allow one pump to be used for the wash down spray hose, and the second pump to be used for spindle nozzle coolant. No more mess to clean up...just wash it down the drain!

Our Torus PRO customers will be able to see our servo Torus PRO running as well. See the smooth operation of the servos in person.

For all of our machines, Novakon Financing is available at reasonable rates. We've made it easier to own the ultimate mill!


We invite you to join us at the EXPO and see our machines in action.