i just received my G540 3-Axis NEMA23 381oz in PSU48V/7.3A kit from
G540 3-Axis NEMA23 381oz in PSU48V/7.3A | Automation Technology Inc
Just started looking thru the connections and see a ground pins in the connectors and don't see where they connect in the cable to the motor?
I have 18/4 shielded cable with the copper wire in it. I just don't recall a ground wire on the motor.
Where does the ground connect too?
or does it?
Thread: G540 4 axis driver ground ?
Results 1 to 7 of 7
Threaded View
-
11-20-2013, 07:51 PM #1
Registered
- Join Date
- Mar 2007
- Posts
- 31
G540 4 axis driver ground ?
Reply With QuoteSimilar Threads
-
Ground Rod Driver. How?
By Al_The_Man in forum Community Club HouseReplies: 4Last Post: 05-23-2013, 07:12 PM -
2 Motors 1 Axis Driver in Gecko G540
By guy2b1 in forum DIY CNC Router Table MachinesReplies: 1Last Post: 06-10-2012, 04:00 AM -
G540 Sheilded cable ground
By LazyMan in forum Gecko DrivesReplies: 0Last Post: 07-28-2011, 12:26 AM -
single axis driver and a b.o.b.,or multi-axis driver board
By .xXACEXx. in forum Stepper Motors / DrivesReplies: 3Last Post: 07-03-2007, 05:13 AM -
Motor Driver where to put ground?
By Trapper14 in forum CNC Machine Related ElectronicsReplies: 10Last Post: 08-08-2006, 08:20 AM
Posting Permissions
