http://www.cnc.info.pl//files/schema...3_osie_165.pdf

I'm having problems with my board. I had it running OK for a little while, but then things went south. I don't think I fried a chip, because when I'm accelerating, sometimes there is a sweet spot where it runs OK.

The documentation totally sucks on this thing. I bought the Ebay package with 3 23HS8610 motors, and I can't find the motor current on the company's website. here: 23HS Stepper Motor 57mm 1.8degree, MotionKing Stepper Motor

They have every other motor rated, but not this one. So, how am I supposed to know where I should set my dip switches?

The Mach3 tutorials make it look easy, just get your tpi*steps/rev and plug in the value under "motor tuning". It didn't work out. I don't think it's Mach's fault.


EDIT: I found the code for the motor:
MotionKing Hybrid Stepper Motors Part Number coding - Ver. 20120

That's their new web page on reading the product code.

Here's a screen shot of the old version of the product code.

Mine's good for 10 amps then.