the problem is that i am going for CNCFusion's kit.. and he uses nema 23 on X and Y axis .. and a NEMA 32 on the Z
AND it is direct drive...
i am confused what to do now.. maby i have to stick to "just" plain digital steppers..?
Results 1 to 20 of 71
Threaded View
-
06-20-2014, 06:05 PM #11
Registered
- Join Date
- Dec 2013
- Posts
- 159
Re: jossa's G0619, going CNC one step at a time
Reply With QuoteSimilar Threads
-
LinuxCnc "Step Time" "Step Space" "Direction Hold" "Direction Setup" values??
By blau_schuh in forum Dmm TechnologyReplies: 5Last Post: 01-12-2014, 07:07 PM -
Tranlate puls/dir control signals to Step Time, Step Space, Direction Hold (LinuxCNC)
By jandan in forum CNC Machine Related ElectronicsReplies: 4Last Post: 09-10-2013, 04:52 AM -
Kflop Dir / Step setup time
By BobKinsman in forum Dynomotion/Kflop/KanalogReplies: 3Last Post: 11-16-2012, 12:10 AM -
Step/Direction pins should be Step FWD and Step BACK
By rayscott in forum Mach Software (ArtSoft software)Replies: 6Last Post: 02-10-2010, 12:57 AM -
Step time values for 990H
By svenakela in forum Servo DrivesReplies: 0Last Post: 09-23-2009, 09:36 AM
Tags for this Thread
Posting Permissions
