I failed on a task today and I wanted to ask how you would carry it out...

I wanted to do the following:

Two equal parts are clamped and I defined the reference point with 2 Presets...
I first wanted to process one part, then the other one afterwards. The Tool Call of the particular Preset call (cycl247) and the subprogram call is in the main program. I have a few more labels in the subprogram after M30.

The problem is that it processes the first part but then it can’t get to the preset and the subprogram because of the M30. However, I can’t delete M30 is the subprogram because otherwise the label is not read out anymore.

I have read something about a jump command (FN9)and already tried it out but without success.

Regard
Sven