I had a very strange mach issue yesterday and wondering if anyone knows what happened. I was doing a pretty long cut and around line 7500 I had a tool change. I changed the tool but also had to put some bolts in to hold the parts to the jig so it took about 5 minutes. When I tried to continue, mach just sat there. Moved one line and stopped. No coolant came on, spindle didn't start, nothing. I had to shut down and restart and everything was fine.

I had an issue earlier in the week where it seemed to pause between lines for just a split second. I was doing a helix down and it stopped every 180 degrees. Restarted and everything was back to normal.

Thanks - Keith