Deja vu here I go again with a bench top mill CNC conversion. This time I'm starting with the Charter Oak Automation 12z mill, 26x12x22 inch work cube, 3HP 3 phase Leeson with Danfoss VFD as the base unit. I will be chucking the gears and adding a two speed belt drive for a 5,300 rpm spindle speed. For now I'm contemplating rolling my own CNC conversion vs buying their kit but that decision is not set in stone yet. I'm going to price it out and see what things look like.

Attachment 253270

In related news...ahahaha new mill induced spending spree!

Inbound - 7x12 Turn-Pro band saw

Attachment 253272

Inbound - EMT ER32 collet chuck set

Attachment 253274

Inbound - Albrecht R8 keyless chuck

Attachment 253276

Inbound - Te-Co made in USA fixturing clamp set, what the hell it was only $20 more for made in USA.

Attachment 253278

Inbound - Grabbed this Aloris QCTP for the lathe while I was at it

Attachment 253280

Inbound - Drool, I ordered one of these also Lincoln Power MIG 210 MP (plus TIG and stick)