Quote Originally Posted by James Newton View Post
Ok, so now it's at $38 dollars, without the programming connector, power supply stuff, and fuse. (I figure you only program once, and will use a PC power supply)

https://www.mouser.com/ProjectManage...sID=5e17007e20

And I used network resistors where I could to keep the parts count under control (which means those would need to be replaced with standard to use with the existing board layout, or a new layout made)

Before I order the parts, I would REALLY appreciate it if anyone would check it over and make sure there are no errors.

https://www.mouser.com/ProjectManage...sID=5e17007e20
Parts look in order to me. The list contains more than 1 variant for a position like for the power resistor. You will have to choose one that fits better in your board.
I am really curious to see a SMD design of a PCB.

Mihai