Hello, in the motor tuning you can set the acceleration for start and stop of the stepper motors. I want it to start and stop pretty smooth so I set the values for that. But when I load a G-Code for example: g0 x0 - g0 x100 - g0 x0 the motor change the direction directly without a soft slow down and a soft acceleration... I want to use the g0 command because I am moving a camera to different positions and I want it go fast but I don´t want it to go to fast when it shall slow down and so. Is there any body who knows what to do?

best regards: Flyingpickles