Hi there,

I have a set of miniature SKF ballscrews that I am planning on putting onto my Micro Mill. They are 10mm in diameter and have a pitch of 3mm. I have not used any ballscrews before, so I have a few questions on them.

The first 'problem' is that they don't have any wipers and wipers aren't available for this model from SKF either. I have a strong feeling that I will need wipers for the added protection from swarf and other rubbish. Any suggestions on how to make wipers or where to get some?

I'd also like some advice on general care and maintenace. How often do ballscrews need to be lubricated and what lubricant should be used with them? Finally, if anyone is familiar with 'the anatomy' of a Sieg X1, what kind of protection would be advised on the actual machine. At the moment, I can see no simple way to include guards or covers for the ballscrews.

Thanks in advance
Warren