Cutter Comp Help Requested


I'm running Dolphin Partmaster V13 along with Mach3 on a 3 axis bridgeport style mill and I can't seem to get Dolphin to output a file using G41/G42 when using the post processor for Mach3 on a 2D profile - or any profile for that matter. I'm not cutting a pockect - use a regular profile cut.

I'll set up a profile to cut using the "goround" command and select "Use part surface programming", and yet no G42/G41. If I switch to a different post processor - something other them Mach3 - with the same cutter path, Dolphin includes G41/G42 in the G-code program when posted.

I'm thinking it is a problem with the post processor since I can get G41/G42 when I select a different post processor.

Any one else run into a similar problem?


Thanks in advance.

Randy