Has anyone worked with this combination of driver and motion controller before? The UC300 is a 5 axis motion controller with 5 digital ports with 26 pins each. The connection I need to make to CN1 on the leadshine driver is a 44 pin D sub connector. I haven't been able to find any premade cables that would work, and I doubt such a thing would even exist as it is such an oddball connection. The best I think I can do is to make a 25 pin to 44 pin adapter myself. Has anyone done this before or is there a better solution. I want to keep things as simple as possible for the inevitable troubleshooting that will be required, and electronics is not my area of expertise.