Hey Guys,

Brought back to life an old Kitamura Mycenter1 with the Fanuc 3M control. Everything appears to be in working condition except when I jog the axis, the control reads greater than what the actual movement is. Example, I have a total of 16" of travel in my Z, yet when I handwheel the Z axis manually, the control says I come up close to 31", so I know it's off somewhere.

I was looking at parameters 007, 008, 009 and was able to get close to an actual movement number but still not correct.

Anyone ever experienced this before and have any helpful tips I can try to do? Thanks!

Matt