Hi I have a 100 watt nova 35 that is 8 months old. I have been using it
with no problems up until now. I can do a pulse of the laser and any files
already on the laser will fire the laser. Any new files I add or saved
ones from the rdworks saved files the laser does not fire. The head moves
but no laser firing. This started when I set up the rotary .. the head
moved and so did the rotary but no laser firing.
Any new files loaded from rdworks have no laser firing only the head
moving, fans coming on.
If I use a file from previous days on the laser it works.
Also there are 4 files on the machine that I cant remove. If I scroll over
them the machine locks up and says no device detected.
I have uninstalled Rdworks and reinstalled it with no change.
Can you help please.
Thanks
Garnet