First time ever post on the Zone. Been a lurker for several years now. I previously built a plywood MDF machine loosely based on Joes 2006. It worked pretty well at first.but as time went on it got hard to keep it lined up and keep things tight. The machine ended up in storage for a couple of years and when I got it out again I saw it was just going to take to much to make it work well. So that’s how I ended up with the Saturn.
I’ve had the machine since the middle of February. Here it’s getting backed into the garage.
Used an engine hoist to pick it up and set it on the leg kit.worked very well.
I ended up with 1/4” pulleys instead of 3/8” that fit my motors,but a call to Nate and he got me the right ones, so I’ve been able to get motors mounted and cables ran and keep moving forward.

I know I’m going to have many questions for all you experienced Saturn builders as this project moves forward.
Thanks for bearing with me on this first post from a rookie.

Terry



Sent from my iPad using Tapatalk