Hi Guys,
Is there a procedure for adjusting the Y-axis gib other than trial and error? I needed to disassemble the Tormach (1100) for a recent move and now need to reset the gib adjustment.
Thanks,
Robert
Thread: Y Axis Gib Adjustment Procedure
Results 1 to 3 of 3
Threaded View
-
12-12-2018, 08:09 PM #1
Registered
- Join Date
- Sep 2005
- Posts
- 540
Y Axis Gib Adjustment Procedure
Reply With QuoteSimilar Threads
-
Y axis ball screw replacement procedure
By JTillotson in forum Tormach Personal CNC MillReplies: 16Last Post: 10-24-2022, 09:42 PM -
LT15-M all axis zero zet+set limit procedure
By kurmay in forum OkumaReplies: 2Last Post: 05-28-2018, 08:23 AM -
Doosan Lynx 220 LMS-C - "Y" Direction adjustment procedure
By avongil in forum Daewoo/DoosanReplies: 3Last Post: 05-04-2018, 09:33 PM -
Gettys N360 Servo drive adjustment procedure.
By Bill1969 in forum OneCNCReplies: 0Last Post: 01-30-2014, 05:45 PM -
Axis bypass procedure for diagnosis in 10M
By ranjankrana in forum FanucReplies: 4Last Post: 12-25-2007, 04:47 PM
Tags for this Thread
Posting Permissions
