Hello, I am the proud new owner of the PRO4824. My current shop is about 10'x28' so needed to get the smaller version with possibility of future upgrade. 8020 finally shipped the extrusions, so started the build a couple days ago.

As you see from the pictures, the components from the Kit are all nicely labeled for every step of the build process. The kit is a joy to build and everything is going together amazingly well. It's so easy my teenage daughters are doing about 95% of the build. I am answering questions and doing the final tightening and squaring behind them.

So far, the build has taken about 5 hours - and that is with me and my daughters going slowly. The next step is to add the Z-axis and Spindle.

I will likely have some newbie questions. But the experience has been great so far.

One thing I need to address is that the X-Axis is not moving very easily right now. I lubricated as described in the video. I will need to loosen some bolts and play around a bit.