Gents-

I've learned immensely from everybody's input on this forum. To give back, I've compiled all my thoughts on the G0704 belt drive topic in this video.
https://youtu.be/0sSs5_kh4OE

Styles of belt drive tested where, L-style timing belts, V belts, and MicroRib PolyV J belts.

In the end, if using the stock motor, very reliable success can be achieved with a Microrib Poly V belt with Delrin pulleys. Cost of material to make the pulleys was about $5 bucks and belt was $5 bucks. Catch the end of video to see the hogging power, no slippage at-all with stock motor.

Hopefully this helps someone else not waste time failing:cheers:.

Crash