Recently, my old Win XP machine died. It ran Tormach's version of Mach 3 using the parallel port. I haven't had much luck locating an older PC with Windows 7 or older, 32-bit with parallel port. I decided to try and use a spare PC I have around which is running Windows 10 64-bit.

From what I've been able to find, Mach 3 will run in Windows 10 provided you use an external motion controller. It seems the UC100 is a common suggestion, which is reported to work according to the manufacturer's website.

I wanted to see if anyone is running a similar setup of Tormach's Mach 3 with Windows 10 64-bit using the UC100 external motion controller. Any thoughts on this?

Thanks!