Hi.

I 've been asked from work to engrave on plexi.The first photo is what I 've done and the second is what I must achieve.You can clearly see a difference in lines.The second one is much whiter and bigger.I used cut not scan cause the dont want to use scan.Ive tried 60 speed and power 10 on a 120 watt laser.When I used more power the cut was deeper but nothing changed.My thought was maybe it's a combination of scan and cut or maybe try lower the laser so its closer to the surface of plexi.The program I use is rd works.Any ideas would be welcome.
Thanks in advance.