I got my QT8N home last night and brought it into the shop today. Put power on it, the fans spun up, the green power button lights up. But unfortunately that's all the further it wants to go. It was in operational and running condition 2 weeks ago.

When the power button is pressed a click can be heard in the back panel and a few lights on the back of the operator panel flash on then off. I checked voltages and confirmed the transformer is set correctly.

The AC in on the NC cardcage is at 101v which I would assume is in tolerance of the 100v circuit.

I had my wife press the power button on the operator panel while I stood at the rear to find the clicking. It was a relay somewhere inside the cardcage, but I discovered that the lights on the cardcage would blink on briefly with each press.

If anyone has any ideas where to start looking they would be very appreciated. I will probably try reseating the cards tomorrow.

Sent from my SM-G955U using Tapatalk