Someone replaced the spindle brake shoes and when you tightened down the bearing retainer it would hit the shoes and bind. I took .03" off the top of the rib of the shoes. Still didn't work and then I noticed that the head of the bolt holding down the shoes was hitting the retainer as well. Put a pan head on and now all is good. I broke the 2 springs taking them off and replacements will be here Friday.
The back gear lever was not working either. The shaft was not installed in the the right position. Easy fix
Bijur oiler missing 4way and some fittings and flex hose. Arriving Friday.

I have to give a shout out to H&W Machine Repair & Rebuilding - Parts and Service for the Metalworking Industry. Awesome service and Barry is great to talk too.

Attachment 441166