Hi all, I am new to VFDs and needing some help deciphering the manual that I received.

Make/model: Huanyang GT series VFD, 4kW

I have everything else set up correctly based on another thread in the forum.



Issue: Currently trying to understand why the spindle is not responding to the AI1 or AI2 inputs (0-10v). I have set the minimum and maximum voltages, set minimum and maximum percentages.

I have also set
P0.01 =1
P0.02 =2
P0.07 =2

P0.08 =?
P0.09 =?
P0.10 =?

P0.11 =5
P0.12 =5

P0.13 =0
P0.14 =DEFAULT (8?)

P0.15 =?
P0.16 =PERFORMED AUTO TUNE DURING INITIAL SETUP



P2.01=4.0
P2.02=300
P2.03=18000
P2.04=220
P2.05=10



P5.10=0
P5.11=.50
P5.12=0
P5.13=0
P5.14=0
P5.15=0
P5.16=.10
P5.17=0 (ASSUMING THIS IS MANUAL TYPO AND ITS SUPPOSED TO BE LOWER LIMIT?)
P5.18=0 (ASSUMING THIS IS ANOTHER MANUAL TYPE AND IS SUPPOSED TO BE LOWER LIMIT?)
P5.19=10 (AI2 UPPER LIMIT)
P5.20=100 (AI2 UPPER LIMIT %)
P5.21=.10

Not sure what else I need to run the VFD/Spindle from motion control. If someone wouldn't mind assisting with troubleshooting this, it would be greatly appreciated!

Thank you in advance!