Hi Guys, I have a 1999 vm 16 with a centurion 6 processor with the rigid tap option... Recently my machine quit rigid tapping, it used to rigid tap fine from my fusion 360 cam posts but now it rapids to the "R" return height point and just sits there spinning the spindle, it also will not rigid tap in a conversational program it does the same thing, it will do a soft tap and reverse the spindle for whatever that's worth... anyone have any ideas? I have tried reloading the original machine parameters thinking my coworker may have gotten into a parameter and changed something but that didnt fix it, any ideas woud be greatly appreciated.

here is the code the is being sent to the control...

O1001 (RIGID TAP)
(T3 D=0.25 CR=0 - ZMIN=-0.52 - RIGHT HAND TAP)
N1 G90 G94 G17
N2 G20
N3 G32
(DRILL5)
N4 T3 M6
N5 S300 M3
N6 G55
N7 M8
N8 G0 X0.9097 Y-0.7169
N9 G43 Z0.6 H3
N10 G0 Z0.2
N11 G98 G88 X0.9097 Y-0.7169 Z-0.52 R0.18 P0 F0.05
N12 X2.2831 Y-2.0903
N13 G80
N14 Z0.6
N15 M9
N16 G32
N17 G28 G91 X0 Y0
N18 G90
N19 M30

here is the screen the control shows when its just stuck in the "R" return height position