Hi CNC Brothers and Sisters,

I have an older Okuma that runs 1 operation production. The driver board for the ATC is on it's 3rd replacement after biting the dust. There is not an ATC on the machine but we still use it for single operations. I'm an looking for a way to bypass/Disable the ATC so the alarm goes away. I contacted Okuma tech support and being the machine is older there isn't anyone that would know how to go about doing this. I haven't found any options in the manual nor the parameters list.
Please if anyone reading this knows how to fix this I would be truly grateful.
I would also pay $$$ to get this fixed.


Thanks in advanced,

David Oates