Hi
just taken delivery of a abandoned dm4400m with a meldas m3 in a rather poor state,
it needs a new battery off course. battery is on its way.
have done the dipswitch routine and have got the screen up and running but unplugged everything the other day and now screen is not working, guess its because of battery died completly.

Have the Y03 amp. fail i cant get rid off but that will clear i hope when i initialaze mc161-1 card.

cant get the axxes to move with the wheel and the fan is blowing constantly. tool changer moves a bit. will that be better with 161-1 card routine?
the machine have been stored outside and i suspect the buttons on the control panel might be stuck in some position.

any pointers where to start?
really want this up and running. off course its possible to retrofit some other control system if needed

Cheers