588,399 active members*
5,696 visitors online*
Register for free
Login

Thread: Taig velocity/acceleration

Results 1 to 6 of 6

Threaded View

  1. 02-11-2007, 07:43 AM #1
    juzwuz
    juzwuz is offline Registered
    Join Date
    May 2005
    Posts
    219

    Taig velocity/acceleration

    Hi! What is a reasonable value of velocity and acceleration on the x,y, and z axes of a Taig mill? I have 280 oz-in stepper motors on each axis. Right now I am using the EMC2 software. I currently set the max velocity to be 30 ipm and max acceleration is 2 inch/sec^2. I was cutting a small lithophane (3 inches wide by 2.25 inches tall) with 30ipm on x,y, and z and I have a strange offset. Is this caused by missed steps or maybe my old computer (1GHZ Pentium 3) had a hiccup? I'm thinking the z-axis velocity and acceleration are probably too high. Thanks!
    Attached Thumbnails Attached Thumbnails IMG_2034x.JPG  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. velocity 2
    By camtd in forum Surfcam
    Replies: 8
    Last Post: 02-11-2007, 04:11 AM
  2. Velocity/Acceleration question
    By studysession in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 01-09-2007, 11:01 PM
  3. Fine Tuning Velocity and Acceleration.
    By sunmix in forum Mach Software (ArtSoft software)
    Replies: 6
    Last Post: 09-30-2006, 07:46 AM
  4. acceleration
    By Iron Brew in forum Waterjet General Topics
    Replies: 0
    Last Post: 02-19-2005, 04:52 AM
  5. Acceleration
    By Photon in forum DIY CNC Router Table Machines
    Replies: 5
    Last Post: 06-03-2004, 06:46 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules