What Do I Need To Wire The VFD?
I am honeslty a bit confused by the Delta manual and not sure what is really needed and what's optional.
From the wall to the VFD, they propose this:

Wall -> NFB(No Fuse Breaker) -> Electromagnetic Contactor -> AC Reactor (if larger than 500kVA) -> Zero Phase Reactor -> EMC Filter -> VFD -> Spindle

I was thinking of at least an EMC Filter and breaker. But do I need the magnetic contactor for a 2.2Kw VFD and the Zero Phase Reactor whatever that is? Others mention Safety Relays, too.

I know I want to run this just for a bit when it shows up - I have seen people ruin VFD straight from the wall but I don't want to fry it, of course.

And for the pernanent wiring, I want it to be OK, but I am also OK with leaving some components out that may more be for running unattended or for certification purposes, if that makes sense.