[damunk]

Hi Damunk- Firstly you have to study motion. Here's something on Kinematics. I haven't looked at it closely, first glance seems good. Peter

https://study.com/academy/topic/over...inematics.html

i cant wait to delve into it while having my shake.

a final question. is a 1300N belt strong enough providing it is aligned and tensioned correct; based on the figures above.

also when i tension it , i am able to tension it to the point where the pulleys get hard to turn by hand.
When I loosen the tension i am able to turn the pulleys by hand.
At which point is there proper tension so there is no stress on the bearings and will not damage the belt it self.