I am about to start wiring up the components on my CNC refit. I'm going to use 18awg shielded tinned cable to my stepper motors. But as for wiring for the control boards and other components should I use 20 or 22 AWG?
Thread: Which Wire Size to Use!
Results 1 to 3 of 3
Threaded View
-
04-08-2025, 07:50 PM #1
Member
- Join Date
- Nov 2013
- Posts
- 52
Which Wire Size to Use!
Reply With QuoteSimilar Threads
-
Via shape/size and wire size.
By Drools in forum PCB millingReplies: 0Last Post: 08-14-2009, 03:47 PM -
Wire EDM - Wire Type and Size
By greenchair in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 06-17-2009, 07:44 PM -
G540 wire size?
By bkboggy in forum Gecko DrivesReplies: 7Last Post: 03-31-2009, 06:04 AM -
power supply size? for multi wire (total 250 inches of wire)
By DanOSB in forum CNC Wire Foam Cutter MachinesReplies: 5Last Post: 03-02-2009, 11:34 PM -
Hookup wire size
By Monte in forum XylotexReplies: 0Last Post: 02-20-2005, 10:52 PM
Tags for this Thread
Posting Permissions
