I have been watching a lot of people build out Joe's machine over the last few months and I have decided to upgraded from my Solsyvia machine to Joe's machine.
As I already have a machine I am going to cut the parts my self. At present I am starting to break down all the drawings and determine what is what. I believe I have figured out all the plastic parts required.
Attached is a drawing of the plastic parts I believe I need (I will be modifing the router attachment to accomondate the dust collector). The T's mean the hole is to be threaded (normally with 1/4 threads).
Anyone see any issues or mistakes?
Thread: Buzz's Build Of Joe's Machine
Results 1 to 20 of 372
Threaded View
-
02-21-2007, 02:43 PM #1
Registered
- Join Date
- Dec 2006
- Posts
- 457
Buzz's Build Of Joe's Machine
Reply With QuoteSimilar Threads
-
My Build - Joe's Kit - Australian
By crocky in forum Joes CNC Model 2006Replies: 10Last Post: 04-20-2020, 10:20 PM -
New CNC machine build (big pics)
By ckm in forum Vertical Mill, Lathe Project LogReplies: 15Last Post: 04-30-2012, 11:49 PM -
Use the second machine to build the first!
By Madclicker in forum CNC Wood Router Project LogReplies: 160Last Post: 06-27-2007, 05:29 AM -
What size machine to build?
By CNCMP in forum DIY CNC Router Table MachinesReplies: 6Last Post: 01-04-2005, 08:36 PM -
Want to build new machine
By thuffner3 in forum CNC Machining CentersReplies: 2Last Post: 02-14-2004, 03:47 PM
Posting Permissions
