Hi all,
I've been researching some technical specs for some motors I bought second hand and Al_The_Man has been very helpful in providing some specs for some engines in the same family as what I have. Below are the specs which most resemble my servos. I see the amperage rating is listed as Max. Pulse Current, I'm curiuos to know if this means a safe continuous amperage, or an unsustainable "peak" amperage. I'll be looking into power supplies soon so I need to have a clear idea of my requirements but I couldn't find a definition for Max. Pulse Current so maybe someone here can tell me.

Electro-Craft servo motors
Cont. stall torque (oz-in) 50
Peak Torque(oz-in) 350
Max. voltage (V) 60
Max speed (rpm) 6000

Mechanical

oz-in-sec2 0.0062
kt Torque constant 11.8
Ke Voltage Constant 8.6
Winding resistance (OHM) RA 1.04
Max pulse current (A) 29
Armature Induct. (mH) 3.3
Body Length(inch) 5.0

Thanks
Splint