Please do not click this if your not really interested in seeing the lathe cut
1/ the file is 7.5mg
2/if your 56k it may take forever to get it
3/I get the use of the FTP for free and i don't want to abuse the useage
But a few have replied with the question of how it runs; this is a low res at 50sec
1 cut of 1mm in P/Bronze 1700 rpm at 35mm/min; cutting a taper of 2.5mm over 25mm


http://www.warshipmodels.com/~SteveNuttall/Lathe.AVI