Looking for some experienced input from members. Looking at breaking into CNC milling with a Journeyman 250 or 325. Needs to fit into a garage shop with 8' ceiling and through a 82" garage door. Looks like the 325 comes in at 79" and the 250 around 84". Have seen some interesting 250 offerings but the height is a real issue for installation. It appears the head is bolted on and could be removed...although a rigging and reinstall concern all to itself.

Anyone have experience getting a 250 through the heigth restrictions? Removal of the top cover provide a lower than 82" height for the shove under the door?

Any thoughts or concerns would be appeaciated as to any leads to a usable machine.